[. . . ] Do not connect the halogen heater to the electrical supply if any of the components or the power cord is damaged in any way. Please read these instructions carefully before using your new halogen heater Unpack the halogen heater making sure that all the items are present and that there are no components left in the box and that the heater head is free from any packing material. [. . . ] Do not push any items through, obstruct or cover the grill of the heater head. Do not move when connected to an electrical supply and always wait for the patio heater to cool down before storing away. Do not leave turned on and unattended especially when Children and or animals are in the vicinity. The indication of the different positions of switches shall be visible from a distance of 1M. The Marking concerning covering shall be visible after the heater has been installed. The unit must be placed with the clearance of 180cm to the floor and 30cm to the ceiling. Don't place the unit closed to curtain and/or other flammable objects. Don't cover the unit with anything during operation or a short time after it's shut down. If the unit gets damaged, it must be repaired by professional electricians. When the power supply cord is damaged, it must be replaced by authorized agent or other professional people to avoid danger. It is not safe to install the unit by a swimming pool, in a bathroom or shower area. It is not safe to use on a building site, greenhouse, barn or stable where there's flammable dust. Don't use this unit in place where causticity or volatile air exists, i. The unit should be plugged in a socket, which is easily visible and reachable. [. . . ] ⷠAlways disconnect the power cable from the electrical supply, when the patio heater is not in use. care and maintenance · When disconnected from the electrical supply, clean the outside Any maintenance or repairs including replacing the halogen tube should only be carried out by a qualified electrician or by a recommended service center. [. . . ]